Comments on: Xbox 360 and the Netgear router http://www.wyckedone.net/2006-09-23/xbox-360-and-the-netgear-router/ si vis pacem, para bellum Fri, 23 Jul 2010 10:54:41 -0400 hourly 1 By: Miguel http://www.wyckedone.net/2006-09-23/xbox-360-and-the-netgear-router/comment-page-1/#comment-81394 Miguel Fri, 10 Jul 2009 16:30:47 +0000 http://www.wyckedone.net/?p=588#comment-81394 I cant connect my xbox to my router. netgear wgt624. im using ethernet cable and i upgraded my firmware. but still no luck. any suggestions? I cant connect my xbox to my router. netgear wgt624. im using ethernet cable and i upgraded my firmware. but still no luck. any suggestions?

]]> By: brandon http://www.wyckedone.net/2006-09-23/xbox-360-and-the-netgear-router/comment-page-1/#comment-81359 brandon Sat, 07 Mar 2009 19:38:19 +0000 http://www.wyckedone.net/?p=588#comment-81359 I think netgear should change these routers due to the fact that everyone with this router has problems. It just plain sucks. Mine will turn off right in the middle of gameplay and reset itself resultin in me losing connection to xbox live I think netgear should change these routers due to the fact that everyone with this router has problems. It just plain sucks. Mine will turn off right in the middle of gameplay and reset itself resultin in me losing connection to xbox live

]]> By: uncutJiggaman http://www.wyckedone.net/2006-09-23/xbox-360-and-the-netgear-router/comment-page-1/#comment-74963 uncutJiggaman Thu, 27 Dec 2007 06:47:00 +0000 http://www.wyckedone.net/?p=588#comment-74963 I tried everything (Port forwarding, static IP, etc...) I totally ignored several recommendations to upgrade my routers firmware until I had no other options...Low and behold, after updating my firmware, everything worked perfectly! UPGRADE YOUR FIRMWARE BEFORE DOING ANYTHING! I was using a netgear router I tried everything (Port forwarding, static IP, etc…) I totally ignored several recommendations to upgrade my routers firmware until I had no other options…Low and behold, after updating my firmware, everything worked perfectly!

UPGRADE YOUR FIRMWARE BEFORE DOING ANYTHING!

I was using a netgear router

]]> By: nizzle http://www.wyckedone.net/2006-09-23/xbox-360-and-the-netgear-router/comment-page-1/#comment-22344 nizzle Sat, 13 Jan 2007 18:01:40 +0000 http://www.wyckedone.net/?p=588#comment-22344 upnp worked fo rme.. port forwarding did not (same port) upnp worked fo rme.. port forwarding did not (same port)

]]> By: wyckedone http://www.wyckedone.net/2006-09-23/xbox-360-and-the-netgear-router/comment-page-1/#comment-14063 wyckedone Mon, 09 Oct 2006 11:45:51 +0000 http://www.wyckedone.net/?p=588#comment-14063 You could try setting a DHCP reservation for the Xbox (if it's not static) and then enable UPnP after removing any other forwarding you have done. This will insure that the Xbox always has the same IP. You could try setting the IP of the Xbox as a DMZ server just to see if it works. Keep in mind that all traffic will be able to pass to it so I wouldn't leave it like that. You could try setting a DHCP reservation for the Xbox (if it’s not static) and then enable UPnP after removing any other forwarding you have done. This will insure that the Xbox always has the same IP.

You could try setting the IP of the Xbox as a DMZ server just to see if it works. Keep in mind that all traffic will be able to pass to it so I wouldn’t leave it like that.

]]>